Akiyama Acorde Manuel d'utilisateur télécharger pdf (Page 4)

REAR PANEL FEATURES

FRONT PANEL FEATURES

TOP PANEL FEATURES

ENGLISH

AC powercord

POWER ON / OFF SWITCH

RCA AUDIO OUTPUT CABLES

This power cable should be plugged into a wall receptable,After all audio connections are made.

TurnsACORDE on or off.

These cables should be plugged into the audio inputs of your home stereo system.

Note: you can still copy records to your USB device or SD card, even, if the audio outputs of the

turntable are not connected to a stereo system

1. Connect a USB device or SD CARD with MP3 files to the USB slot or SD CARD slot respectively. The

LCD will show “USB READ” or CARD READ” when it is properly connected, and USB or SD CARD

will be shown in the upper right corner.

1. Connect a USB device or SD CARD with or with out MP3 files to the USB slot or SD CARD slot

respectively. The LCD will show “USB READ” or CARD READ” when it is properly connected, and

USB or SD CARD will be shown in the upper right corner.

2. The LCD will display the total number of folders on the device

(on the left) and the total number of available tracks (on the right).

Use theTRACK buttons to move throught the tracks.

You can also press NEXT FOLDER buttonto jump to first track of

the next folder.Thecurrenttrackwillbeginplaying.

2. If the device already contains Mp3s, the display will shows the

total number of folders on the device (on the left) and the total

number of available tracks (on the right)

3.TheLCDwill show the PLAYicon,thetracknumber an the time

elapsed.

- To skip to another track, use the TRACK buttons. The

Display will briefly show the number of the folder and the new

track.

-To pause playback, press the PLAY/PAUSE button.

-To stop playback, press the STOPbutton

- To switch how ACORDE plays the tracks, press the PLAY

MODE button:

Repeat

RepeatAll

Repeat Folder

Random

, the current track will repeat.

, the entire collection of tracks will repeat.

, the collection of tracks in the current folder will

repeat.

, All the tracks in your connecte device will play in

3. Cue up the music you want to record from a record on the

PLATTER.

4. To eject the device, first stop the current track by pressing STOP

button. If your device is a USB drive, gently pull it from the slot. If

your device is an SD CARD, push it into the slot until it clicks,

then gently remove it.

4. Press RECORD. The display will show “LOADING”. When

the PLAY/PAUSE icon and time display are flashing on the LCD,

ACORD is ready to record.

5.To begin recording. press PLAY/PAUSE. Items on the LCD will

flash briefly and “REC” will be shown to indicate ACORD is

recording. The display will show the track number and the time

elapsed.

- To start a new track immediately without stopping the recording

process, press SPLIT TRACK. The currently recording track will

stop and a new recording will begin.

- To stop recording, press the STOP button. Tha LCD display will

show “USB READ or “CARD READ” to show it is rescanning the

connected device for your new tracks.

Note: Tracks that are split will be given sequential track numbers

and stored in the same folder.

6. After stopping the recording, you may play new tracks or eject

your device. To eject the device, first stop the current track by

pressing the STOP button. If your device ia a USB drive, gently

pull it from the slot. If your device is an SD card, push it into the

slot until it clicks, then gently remove it.

Press button for 45 rpm. Depress button for 33 rpm.

33 / 45 SPEED BUTTON

LCD

PLAY/ PAUSE

STOP

TRACK

REC

This button controls the RPM of the turntable motor.

Shows information pertinent to unit operation.

Press this button to play. While playing, press again to pause. While paused, play again to resume

playback.

Press this button to stop playback or recording.

Skips to the previous track or next track. Press and hold the button down to rewind or fast forward

throught the currect track.

Press this button to enter record mode. Record Mode allows you to record music from the turntable platter

USB SLOT

SD CARD SLOT

Insert USB Pendrive or connect USB hard disk (FAT16 or FAT32 only) to this input.

Insert SD card into this slot until it clicks. To eject it, push it in once until it clicks, then remove it from

the slot.

SD: 64MB - 2GB ; SDHC: 4GB - 16GB.

USB: 1.1, support 64MB - 16GB.

Note: ACORDE does not support USB hubs

Note: ACORDE can only recognize one connected device (USB drive or SD card)atatime

ENGLISH

PLAYING MP3s FROM A DEVICE

NEXTFOLDER

PLAYMODE

Repeat

Repeat All Repeat Folder

Random

SPLITTRACK

ARM ELEVATION SYSTEM

Press this button to skip to the next folder on your connected device and play the first available MP3 in

that folder

Press this button to select how ACORDE will play the tracks: , the current track will repeat.

, the entire collection of tracks will repeat. , the collection of tracks in the

current folder will repeat. ,All the tracks in your connecte device will play in random order.

When recording to your connected device, you can press this button to create a new track.Thenewtrack

number will be one higher than the previous one and saved to the same folder on your device.

Raises and lowers the tone arm.

RECORDING MP3s TO A DEVICE

1 2 3 4 5 6 7 8 9 ... 13 14

Commentaires sur ces manuels

Pas de commentaire

Akiyama Acorde Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Plateau tournant Akiyama Acorde